Please configure the modem for the current system location using “Other Settings” dialog, of the STF PowerFax key, a part of your Key Chain. Then click Resolve to enable PowerFax.

Please quit communication application, then click Resolve to enable PowerFax.



Either the phone connection was poor or a fax compatibility problem exists.  Check the conditions at the remote site and try sending this letter again.

Check if the entire letter was received by the remote site, resend if necessary.

Send this letter again.

Try selecting low resolution in the “Outgoing” information page of the STF PowerFax key (a part of your Key Chain), then send this letter again.

Try lowering the fax send speed (located in the Fax Modem panel of the “Other Settings” dialog, of the STF PowerFax key, a part of your Key Chain). Then send this letter again.

Contact the remote site and verify the condition of their fax machine, then send this letter again.

Make sure the phone number is correct and send this letter again.

Try lowering the send speed (in the Fax Modem panel of the “Other Settings” dialog, of the STF PowerFax key, a part of your Key Chain), unmounting AppleShare volumes, and quiting applications. Then click Resolve to enable PowerFax.

Please reselect a cover page file in the “Outgoing” information page of the STF PowerFax key (a part of your Key Chain). Then click Resolve to enable PowerFax.

Please add STF PowerFax service in the Power Talk Key Chain and configure it for the specified system location.

Please configure STF PowerFax service in the Power Talk Key Chain for the specified system location.

Please wait until transmission is complete. Then choose shutdown again.

Please check your phone line connections. Then click Resolve to enable PowerFax.

Please reselect your modem in the Fax Modem panel (located in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolve to enable PowerFax.

Please wait until the transmission is finished and select a serial port in the Connection panel (in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolve to enable PowerFax.

Please make sure the serial port is not in use and reselect it in the Connection panel (located in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolve to enable PowerFax.

Please quit comm. applications and reselect the serial port in the Connections panel (located in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolve to enable PowerFax.

Please make sure PowerFax is installed correctly. If problems persist, remove the PowerFax service from the Key Chain and add it again.

Please restart your Macintosh to enable PowerFax. If problems persist, remove the PowerFax service from the Key Chain and completely reinstall STF PowerFax.

Please make sure PowerFax is installed correctly. If problems persist, remove the PowerFax service from the Key Chain and completely reinstall STF PowerFax.

Please configure STF PowerFax in your Key Chain for the current system location. Then click Resolve to enable PowerFax.

Please free up some space on the system disk. Then click Resolve to enable PowerFax.

Please quit some applications  to make more memory available. Consider also turning off dithering in the “Outgoing” information page of the STF PowerFax key. Then click Resolve to enable PowerFax.

Please check your modem selection in the Fax Modem panel (located in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolve to enable PowerFax.

Please check modem initialization string in the “Modem Init” panel (located in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolve to enable PowerFax.

Please check your modem connections, then click Resolve to enable PowerFax.  If problems persist, turn the modem off, wait a few moments, turn the modem back on and try again.

Click the “On” button in the Fax Software panel (located in the “Other Settings” dialog, on the “Outgoing” information page of the STF PowerFax key, a part of your Key Chain). Then click Resolveto enable PowerFax.